But it could be rain helping close a circuit on a rusty antenna connector port. Or rain improving the grounding of some neighboring circuit that otherwise drains through the metal scaffolding the antenna is attached to. Or rain attenuating a neighbor's own Wi-Fi that otherwise might have been aggressively transmitting on the same channel as our units.
The rain and the Wi-Fi devices were clearly related. How they were related, was not clear. Aging hardware rusts, breaks, gets yanked around or unseated or pulled out of the ground, or has water enter in places where it shouldn't be.
I was already running diagnostics on everything to figure out which devices might be faulty (local AP, local bridge unit, local antenna, remote antenna, remote bridge unit, remote switch, remote modem/router, upstream connection to ISP) so checking for "update gone wrong" was a 3 second job: I was already in the admin UI, so check logs, nope, no recent updates, done. I'd rather spend 3 seconds checking something that probably isn't the problem but I can know for sure in 3 seconds than risk climbing precariously up a scaffold 30ft in the air only to realize it was just something I could have solved at a keyboard instead.
Risk/reward. Low risk, low reward is okay too if it's super fast and already on the way.
But it could be rain helping close a circuit on a rusty antenna connector port. Or rain improving the grounding of some neighboring circuit that otherwise drains through the metal scaffolding the antenna is attached to. Or rain attenuating a neighbor's own Wi-Fi that otherwise might have been aggressively transmitting on the same channel as our units.
The rain and the Wi-Fi devices were clearly related. How they were related, was not clear. Aging hardware rusts, breaks, gets yanked around or unseated or pulled out of the ground, or has water enter in places where it shouldn't be.
I was already running diagnostics on everything to figure out which devices might be faulty (local AP, local bridge unit, local antenna, remote antenna, remote bridge unit, remote switch, remote modem/router, upstream connection to ISP) so checking for "update gone wrong" was a 3 second job: I was already in the admin UI, so check logs, nope, no recent updates, done. I'd rather spend 3 seconds checking something that probably isn't the problem but I can know for sure in 3 seconds than risk climbing precariously up a scaffold 30ft in the air only to realize it was just something I could have solved at a keyboard instead.
Risk/reward. Low risk, low reward is okay too if it's super fast and already on the way.